GSimpleRelease

Important Note for Android User: GSimpleRelease is now deprecated and will not longer maintained. It does not work with Android 9 (Pie)! Please use GBracket instead.

GSimpleRelease is a small app for Android & IOS. With the help of the App you can easily create focus brackets (each picture with a different focus set) Simply connect the app with your camera, set start and end focus and the app will do the rest for you!

User Guide – Android:

Connect to the network:

As a prerequisite you should have connected your Lumix to the Image App before. In the Wifi Menu of the Lumix you should have entries in the “Select a destination from History” menu.

Select a network and then start the GSimpleRelease APP. The Splash screen indicates in which network the app is searching for the camera. You can easily open the Wifi- Manager to change the network.

Using the Release Tab:

The release tab is a very simplified remote shutter control. Just press the green button to make a photo. The Bulb on / Bulb off toogle button is for easy operation of the bulb function. You have to switch the camera to Bulb before operating the switch. Otherwise it will not work correctly.

Using the Focus Stack Tab:

This tab is for helping you in the creation of Focus Bracktets for creating Focus Stacks. For the actual stacking process you require additional software, this app is just helping you in making the pictures.

Switch the camera to Manual Focus as otherwise the function will not work.

The procedure is very simple: set the starting focus point – this is normally the part of the object nearest to the lens. Use the focus buttons to set the end focus – usually behind the object. You have to set a start and end focus otherwise the function will not work properly.

The Buttons from top to down:

Focus Buttons: The four buttons below are used to adjust the focus. The two left buttons are used for near focus, the two right buttons for far focus. You can adjust the focus in large (outer button) or small increments (inner button).

Set Start / Sent End Focus: if you have focused to the desired positions please press either of the buttons.

Start Focus Bracket: This will display the Bracket dialog. You can either cancel the operation or have the choice between to set the desired step width.

Zero is the Coarse Mode – using larger focus increments, will create less photos (usually 10-25)

Please wait until the finished dialog appears. Sometimes there is a small pause during the stacking operation.

Anleitung Android

Nur zur Panasonic Image App kompatible Lumix Kameras mit der Möglichkeit des manuellen Fokussieren sind unterstützt. Eine Liste aller als funktionierend gemeldeten Modelle findet sich hier:

https://www.minaxsoft.com/dwqa-question/what-lumix-camera-are-supported-by-gsimplerelease/

Kurzanleitung:

Verbindung mit der Kamera:

Voraussetzung ist dass die Kamera bereits einmal mit der Panasonic Image App verbunden war. Im Wifi Menü der Lumix sollten sich entsprechende Einträge finden. Entweder direkte oder Verbindung mit einem bestehenden Netzwerk auswählen. Der Start Bildschirm zeigt an mit welchem Netzwerk das Smartphone verbunden ist. Dies sollte mit dem an der Kamera ausgewählten identisch sein. Mittels des Wifi Managers notfalls das richtige Netzwerk auswählen. Normalerweise sollte die Kamera innerhalb weniger Sekunden gefunden werden.

Der Release Tab:

Der Release Tab is ein einfacher Fernauslöser. Einfach den grünen Auslöser drücken um ein Foto zu machen. Mittels des Bulb on / Bulb off Schalters werden Langzeitaufnahmen vereinfacht. Dazu muss an der Kamera Bulb eingestellt werden.

Der Focus Stack Tab:

Dieser Tab erlaubt das automatische Erstellen von sog. Focus Bracktets, d.h. es wird eine Bilderserie erstellt mit unterschiedlichem Fokus für jedes Bild. Für das eigentliche Stacking ist zusätzliche Software wie z.B. Helicon Focus erforderlich.

An der Kamera muss manueller Fokus ausgewählt sein. Die Funktion geht nicht in AF oder intelligenten Modi.

Der eigentliche Bracket Vorgang ist einfach. Mittels der vier Fokus-Tasten auf Nahbereich fokussieren und an der passenden Stelle den Start-Fokus setzen. Dann auf Fern fokussieren und den Endpunkt setzen. Beide Punkte müssen gesetzt sein.

Start Focus Bracket: Hiermit wird der Bracket Dialog angezeigt. Während des Prozesses kann der Vorgang mit Cancel abgebrochen werden. Mittels der Step-Width kann die Anzahl der Schritte festgelegt werden nach denen ein Foto gemacht wird. Eins -> nach jedem Fokusschritt ein Foto, Zwei -> zwei Fokusschritte, Foto etc.

Null ist der Grobmodus wobei der Fokus in recht großen Schritten bewegt wird.

Bitte warten bis der Finish-Dialog erscheint.